Barriers are the best choice and designed for entrances where there are high security requirements. The stopping barrier is designed for crash resistance through strong foundation & structure.
The boom Barriers are the most suitable solution for various security applications. Widely used in Military sites, Governmental places, Embassies, Public & Private properties.
Hydraulic boom barrier is K-4 Crash Rated Road Barrier. They are designed as Heavy duty mechanical & hydraulic structure for certified crash ratings & long term reliability. The central unit is hydraulically operated & in case of power failure it can be lifted manually with hand pump.
The barrier can easily be integrated with a wide range of access control systems for automatic operations. Other accessories like Safety loop detectors, traffic signal lights and Indication lights can also be integrated with barrier.
It is a crash-rated, tested and certified solution for controlling heavy-duty vehicles. The design and construction include heavy steel sections with mild steel skirts and covers. The top plate is a checker sheet anti-slip plate to withstand an axle load of 15-20 tons.
The blocking segment shall be secured into a subsurface mounting frame and will be rotated through 35~ 43 degrees to secure the roadway. On impact, the forces exerted on the blocking segment should be partially absorbed by the structure, with the balance transmitted through the substantial frame and into the reinforced foundations. The segment is designed to absorb/withstand impacts from small and large commercial vehicles like Cars, Vans, SUVs & and other higher chassis vehicles.
A crash-rated Delta barrier is an enhanced and modified form of the Double Boom Barrier. It is unique in design and provides high strength, maximum security, and safety. Hydraulic Boom Barriers are the strongest road barriers on the market.
It operates using a Hydraulic System. It consists of a Hydraulic Jack, Motor, and other electrical Equipment. These barriers are usually not used for conventional traffic flow. They are installed in high-security threat areas or sensitive sites.
They are the most common type of vehicle access control system. These barriers are heavy-duty and can withstand a strong vehicle attack.
The operation is manual and usually designed to control access flow. These barriers are installed where there is no electricity or frequent power failures. They are installed either in low-maintenance or remote areas.
Crash Rated Certified K-4, K-8, K-12
Heavy Duty Mechanism for strength & Durability
Manual Hand Pump Operation in Case of Power Failure
Programmable (PLC) Control Panel
Low Maintenance & Easy Installation
Flexibility to Integrate with wide Range of Access Control devices.
Available in Mild Steel Painted Finish
Warranty & After Sale Services with Terms & Conditions
| Material | Mild Steel |
| Rising Angle | Up to 90 Degree |
| Barrier Arm | As per Site Requirement (16 ft. standard) |
| Power Requirement | 3 Phase, 50-60 Hz |
| HCU Motor | Heavy Duty motor, 5HP 400V |
| Structure | Heavy Duty Rectangular or Circular Boom |
| Operational Speed | 4-6 Seconds |
| Magnetic contactors | Magnetic Contactor is installed in Electrical panel just to protect the system from back EMF of motor. Magnetic contactor isolates Motor from rest of the panel equipment. |
| Protection Relays | Voltage overload/under load, Phase Protection Relay Included, overcurrent protection through CB |
| Control Cabinet | Weather Proof Control Cabinet will house all active hydraulic, electrical and electronic component |
| Control Unit | Industrial PLC Based Electronic Control Unit |
| Finishing | Painted |
| Price Range (PKR) | 250,000 – 700,000 |
