Mechatronix offers high-quality turnstile solutions that meet customer’s expectations. All models integrate with almost every brand of access control system available in the market and provide high level of reliability and efficiency in operation. In these days of heightened security, it is imperative to have a durable and reliable security system. Our turnstile solutions offer improved security and extended flow capacity.
It is a crash-rated, tested and certified solution for controlling heavy-duty vehicles. The design and construction include heavy steel sections with mild steel skirts and covers. The top plate is a checker sheet anti-slip plate to withstand an axle load of 15-20 tons.
The blocking segment shall be secured into a subsurface mounting frame and will be rotated through 35~ 43 degrees to secure the roadway. On impact, the forces exerted on the blocking segment should be partially absorbed by the structure, with the balance transmitted through the substantial frame and into the reinforced foundations. The segment is designed to absorb/withstand impacts from small and large commercial vehicles like Cars, Vans, SUVs & and other higher chassis vehicles.
This is used for controlling the entry/exit of vehicles to sensitive security buildings, which has a threat of terrorism or crime by any sort of vehicle attack.
Most reliable and helpful for controlling the access of vehicles to sensitive perimeter. Hydraulically operated road blocker with Crash Rating can be installed for maximum security and safety applications.
• It is K-8/K-12 Rated Blocker (6,803.886 Kg 40 @ mph & 50mph)
• Military air bases, ministries and governmental buildings.
• Security buildings and police stations.
The Mex Road Blocker, along with MEX security features, includes safety loop detectors and light sensors for vehicle safety. A heavy-duty hydraulic system is best suited for continuous operations.
According to international standards, our products are K-Rated, Certified and tested. The K-Rated barricades are tested and proven to stop 15000 lb with an impact Rate at 30, 40, or 50 MPH. The K-Ratings are K-4, K-8 and K-12.
The road blockers feature manual raising and lowering, and install flush to the finished roadway when retracted.
For more details download product brochure or visit road blocker blogs.
| Material | Mild Steel |
| Raised Height | 600-1000 Mm (Adjustable) |
| Axle Load Resistance | 20 Tons |
| Power Requirement | 3 Phase, 50-60 Hz |
| HPU Motor | Hydraulic Motor With 5-7.5 HP Capacity 400 V |
| Structure | Composite Fabricated Structure With Different Sizes Of Flange Beams, UPN Channels And Equal Angle Section 6-10mm |
| Operational Speed | 4-6 Seconds |
| Top Chequered Plate | 6-10 Mm Antiskid Chequered Plate |
| Hydraulic Pump | 14 Litres Per Minute At 1400 RPM , Gear Type , Max 2800 RPM , Aluminum |
| Hydraulic Actuators | 65mm External Diameter, 50mm Shaft Diameter, Synthetic High Pressure Seals |
| Safety Valves & Gadgets | Pressure Safety Valve ,60-80 Bars Instead Of 140 Bars And Manual Relief Valve |
| Maximum Allowable Piping Between Pistons Of Road Blocker And Hydraulic System | At Maximum 10 Meter Required |
| Tank Size , Filters , Gauges | 40 Liters , Oil Level, Suction And Breather Filter Attached |
| Protection Relays | Voltage Overload/Under Load, Phase Protection Relay Included, Overcurrent Protection Through CB |
| Control Cabinet | Weather Proof Control Cabinet Will House All Active Hydraulic, Electrical And Electronic Component |
| Control Unit | Industrial PLC Based Electronic Control Unit |
| Finish | Red Oxide & Enamel Coating, Colored Tough Pavers (Optional), Hot Dipped Galvanized (Optional) |
| Price Range (PKR) | 290,000 - 1,800,000 |
